Every household needs the electrical service in Gastonia, NC, at least once a year. In most cases, it is small services that every electrician knows (and is also allowed to do), such as short repair, replacement of a damaged socket, installation of new lighting fixtures, and more. But sometimes these are more complex works such as: replacing the entire electrical system with an old apartment or upgrading from one-phase to three-phase. Whether it is a small service or a difficultjob, there is basic knowledge needed for each consumer before turning to an electrician.
So many apartments install a three-phase counter. A single-phase counter is suitable for low power consumption, while a three-phase counter is suitable for high power consumption. A three-phase counter allows both higher electricity consumption and the distribution of the consumption load. A single-phase meter of 25 amps allows for 5,750 watts, while eight of 40 amps allow consumption of 9,200 watts.
Is every electrician allowed to do any work?
To move from the one-phase installation to a three-phase, you must first request a permit to consume from the electric company. The price of the license will vary significantly depending on the meter you have and the meter you want. For example, if your home has a single-phase meter of 25 amps, a price can go beyond for a three-phase meter of 25×3 amp. In addition, you must order a qualified electrician to perform the installation.
Common types of electriciansÂ
An assistant electrical service in Gastonia, NC – can help perform low-voltage electrical work (what is low voltage – later on) under the supervision of a qualified electrician or higher, but not independently. Those who have an “electrician assistant” certificate can only help. A practical electrician is allowed to perform electrical work at low voltage and also make plans for up to 40 amps. If the voltage is low and the stress issue is not a problem for a practical electrician, the limit of 40 amps is more significant. A certified electrician -can do all the electrical work and make plans up to 80×30 amps. Chief electrician – performs electrical work, including drawing up plans to 3×250 amps.